Your needs, this model
Does it fit your priorities?
Is a dedicated powered frozen HOLD mode documented for the sphere model?
Yes. The exact current gallery explicitly identifies Rock Pro HOLD and its physicalCrystal/Rapid/Hold slider. The frozen quantity is not established.
Explore this need in the finder →Can HOLD satisfy twenty-four pounds of daily production and nine stored spheres in that same mode?
Not confirmed. The24lb figure belongs to Rapid; nine refers to collection capacity, not a proven frozen HOLD quantity.
Explore this need in the finder →Will its nominal sphere diameter meet a maximum of2.25inches?
No. The stated sphere diameter is2.5inches. Check the usable interior of the glass, including taper.
Explore this need in the finder →The Euhomy Rock Pro IM031 combines large 2.5-inch sphere ice with app scheduling and a named HOLD mode. It is a home-bar appliance for someone who wants a substantial single piece in a glass and is willing to plan production. Its frozen-hold claim, rapid output and nine-piece collection basket describe different parts of that routine.
Check the glass before choosing the larger sphere
The exact current US product record identifies this Rock Pro as IM031. Its nominal sphere diameter is 6.3 centimeters, or 2.5 inches. That is larger than the two-inch spheres of the Rock SE IM046. Check the narrowest usable part of the glass, not only the outside diameter of its rim, and allow space for liquid around the ice.
A large sphere can be attractive for a drink served with one piece of ice. It is a less natural choice for narrow water bottles, many small glasses or a routine built around repeatedly scooping ice into a blender. If those uses dominate, a different format such as the Dart H1 Pro IM034's bullets is worth considering before comparing decorative finishes.
Euhomy notes that seams, small dimples and slightly flat areas can result from the molding process. Expect a formed ice sphere rather than a promise that every piece will be geometrically perfect. Its clear-ice description also depends on water and operating conditions.
Forty-five and ninety minutes are distinct modes
The specification table gives approximately forty-five minutes for Rapid and ninety minutes for Quality. Its 24-pound daily figure is explicitly attached to Rapid. A Quality-mode daily output is not established by that number. Euhomy's FAQ places reference cycle times at a room temperature of about 70°F and warns that a warmer room extends them; it does not supply a complete room-and-water test pair for the daily output.
This makes advance planning more useful than a large pounds-per-day headline. Start before the first drink is needed, and decide whether the shorter cycle or the quality-focused setting fits the occasion. The exact pieces per harvest are not established in the readable specification, so photographs of several spheres should not be used to calculate how many rounds a cycle will serve.
HOLD does not establish nine frozen spheres ready while making more
The manufacturer explicitly advertises continuous cooling and a HOLD mode intended to keep finished spheres frozen and separate. That is a meaningful feature for someone whose serving time is uncertain. The documentation available here does not establish that the entire catch basket remains at a freezer temperature, how many pieces HOLD can preserve, or that maximum production continues during holding.
The listed two-liter basket accommodates up to nine pieces. Treat that as the collection capacity. A requirement for twenty-four pounds of ongoing daily production plus nine spheres in confirmed frozen storage goes beyond the available operating details. Confirm the actual hold location and capacity with Euhomy if that combination is the reason for purchasing. The buying finder keeps holding and production as separate modes.
App scheduling and remote monitoring can help begin production ahead of a gathering. They still depend on water being available, adequate collection space and a correctly configured connection. The precise network-band requirement and offline controls are not confirmed in the observed exact-model support information; avoid assuming they match a different connected Euhomy machine.
Plan a permanent enough place for it
The product table lists a 1.8-liter water reservoir and body dimensions of 11.4 by 18.1 by 16.9 inches, without a clear axis key. Confirm width, height, complete depth and ventilation allowances before buying for a tight recess. A front drip tray and room to handle the ice also affect the space you will use. The stainless steel, aluminum and leather description concerns the exterior; it does not mean every water-contact component is metal.
Ice tongs and a drip tray are included in the current box list. The phone shown alongside the machine represents app control, rather than another supplied item. Keep the air intake away from nearby heat-producing appliances, and follow the exact supplied settling instructions after transport; the current FAQ gives a broad two-to-twenty-four-hour upright period rather than one universal short delay.
Cooling features add no exemption from daily care
Euhomy recommends daily cleaning and daily water replacement with frequent use, plus cleaning before the first use or after storage. The gallery specifies a fifteen-minute automatic cleaning cycle. That cycle is part of cleaning the internal water system, alongside wiping, draining and the rinse procedure in the matching instructions. Discard the initial flushing batches as directed.
The FAQ prohibits chipping internal ice buildup with a tool and directs the owner to the machine's defrost or release function. That matters when choosing a spot where the appliance can be accessed and serviced comfortably. The observed support hub did not provide a matching IM031 manual, so obtain it before using unfamiliar maintenance controls.
Choose the Rock Pro when large spheres, scheduled preparation and a separate holding workflow match your routine. Choose Rock SE for smaller spheres and documented water-line support, or Rock Plus for large square cubes. Verify the hold capacity before depending on this model for an unattended stock of ready-frozen party ice.
Key details at a glance
| Ice shape | sphere |
|---|---|
| Manufacturer daily output claim | Rapid24lb per24h maker claim; ~45min Rapid/~90min Quality referencecycles at70F room, inletwater/daily testpair unconfirmed. HOLD has no assigned production or frozen-piece capacity. |
| Dedicated cleaning cycle confirmed | Yes |
| Timer confirmed | Yes |
| Dedicated powered frozen-retention feature | Yes |
| Sphere collection capacity | 9 balls |
| Approximate sphere diameter | 2.5 in |
| Cleaning/rinse operation | Automatic circulation plus exact prescribed draining, rinsing and manual interior care; no maintenance-free claim. |
| Depth measurement note | Complete working depth with front tray/rear fittings and ventilation unresolved; Pro axis labels andSE dimensions/weight conflict. |
| App ice-production control confirmed | Yes |
| Water reservoir capacity | 1.8 L |
| Stated cleaning-cycle duration | 15 min |
| Frozen-holding limits | Pro has a named HOLD mode; its frozen capacity and simultaneous production are not confirmed. Plus sub-zero claim lacks an established hold workflow. SE insulation is not a specified freezer mode. |
| Manufacturer collection-basket volume | 2 L |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
Find an ice maker for your serving routine.
Compare ice shape, collection capacity and useful care features.
